AMEK - Downloads.

Please read these notes before downloading any software.

These downloadables are configured only for an IBM compatible PC, please do not try to download to a Mac as this will cause errors to be generated in the files.

After downloading the software please unzip onto floppy disks in the A drive, using the command line:-

`pkunzip a:\?.zip`

where ? is replaced with the file name.

This will create a set of installation disks. You will need to have 1 or 2 preformatted diskettes ready at this point.

From these disks type :-

`a:\install`

...to install the new software. Your original files will be backed up. If you have problems with your new software, the readme files will tell you how to restore your old system files.

Please Note

Do not attempt to run the setup program if you have upgraded the software on an Einstein, Hendrix or Mozart, your original setup file will be transferred to your new installation.
Current versions of software may not allow you to use old mixes.
If you have upgraded Einstein, Hendrix or Mozart Supertrue to ver 3.5 and are having keyboard problems please contact Amek, you may need to change a piece of firmware in the keyboard proccessor.

Any other problems please contact us on:- amektechsupport@compuserve.com

tel +44 (0)161 834 6747
fax +44 (0)161 834 0593

If you want to be informed about site and software updates please fill in our guest book.


Note : Please read the VFX information which will provide you with installation guidelines. You may also need to go to the VFX form page to purchase/register this software if you do not have an unlock code.